型号GC-D特性及应用:GC-D系列为无轴承支撑滚柱式单向离合器。使用时需要配合轴承安装以承受轴向负载，使用者亦需提供润滑油脂以及外部的油封。标准润滑方式为使用机油润滑。 标准安装方式为外环与止口配合，并用螺栓固定。内环与轴以键联结。工件机壁孔之公差必须为H7，保证内外环较高同轴度。 该系列常用于包装，印刷，食品，医疗，纺织化工等机械设备上。 Description: Type GC-D is a roller type freewheel non-bearing supported, Earrings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Standard lubrication is oil. Standard install is the outer race fitting in the rabbet and screwed to the bond. The inner race is keyed to the shaft. The rabbet for install the outer must be H7 tolerance, ensure a high axiality. This series extensive used in machinery system of packing, printing, papermaking, weaving, chemical, medical, food and so on. 安装参考范例 安装要求:此型号必须与轴承并排安装.内环同轴度≤0.03
欢迎访问川代轴承机械下属网站：
川代机械轴承网
